Product description
Product description
DURAL stainless steel tile straight edge trim:
Our DURAL angle profile stainless steel is available in three different versions: matt brushed, shiny polished and natural (slightly shiny). All surfaces except natural are supplied with a protective film to protect the machined surface.
These L-shaped profiles are a proven all-rounder when it comes to neatly finishing and protecting tile edges. The DURAL stainless steel angle profile can also be used to protect and finish other floor coverings. Thanks to the heights of 2 to 30 mm, the product is versatile.
When laying around a corner, the profile must be mitred, as there are no corner pieces for this.
You must choose the profile height 1 - 2 mm higher than the thickness of your tile.
You can find samples of the profiles for preview in the linked accessories. The sample pieces always have a height of 10 mm. Please note that the punching of the leg may differ for these.
For other versions of the angle profiles, just look in the category of the same name.
Our recommendation
Our recommendation
DURAL stainless steel tile straight edge trim properties:
| Material |
V2A stainless steel |
| Material thickness |
0,8 mm ± 0,1 mm |
| Surface |
• natural (slightly glossy)
• brushed (matt)
• polished (high gloss) |
| Leg width |
approx. 22 mm |
| Length |
250 cm |
Applications
Applications
Areas of application for your DURAL tile straight edge trim stainless steel:
The DURAL stainless steel angle profile is ideal for a wide range of applications. Wherever you need a clean edge finish for your flooring, this profile is the right choice, making it ideal for stair nosings, flooring separations and finishing various floor coverings, for example.
Processing
Processing
How to process the DURAL stainless steel tile straight edge trim:
- Selecting the height of the profile:
The profile should be selected 1 - 2 mm higher than the thickness of the tile because the tile adhesive will spread a little. This buffer is essential in order to achieve a clean, flush finish to your tiling. - Applying the tile adhesive:
Remove dust and dirt from the substrate and then apply tile adhesive to the relevant area using a notched trowel. - Attaching the profile:
Now press the punched leg of the DURAL stainless steel angle profile into the adhesive bed and align the profile. The leg is then completely embedded in the adhesive. - Attaching the tile:
The tile must be aligned flush with the upper edge of the profile and with a joint of 2 - 3 mm to the profile. - Filling the joint:
Finally, fill the joint completely with grout.
A hacksaw or an angle grinder (use a clean cutting disc) can be used to shorten the DURAL stainless steel angle profile.
Care advice
Care advice
Care instructions for the DURAL stainless steel tile straight edge trim:
Our DURAL stainless steel angle profiles are easy to clean and can simply be cleaned with pH-neutral cleaners. Aggressive, abrasive cleaners should be avoided and dust and dirt can be removed from the profile using the appropriate cleaner and a soft cloth, which will ensure that the profiles retain their elegant appearance for a long time.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance
