Product description
Product description
Stainless steel l shaped tile edge trim:
Our stainless steel angle profile offers a versatile solution for the perfect finish to tiling work.
Brushed profiles are suitable for a modern and elegant appearance. These give your tiles a matt finish and go perfectly with contemporary designs. If you prefer it shiny, the polished angle profiles made of stainless steel are the right choice. These bring a touch of elegance to any room. For a natural look, the angle profiles in natural stainless steel are the ideal choice. With a slightly shiny surface, they give your tiles a stylish touch. We ship brushed and polished profiles with a protective film.
Select the profiles 1 - 2 mm higher than the tile thickness.
For further angle profiles (other materials and surfaces), simply look in the relevant category. You can find 10 mm samples of the different profiles in the accessories.
Our recommendation
Our recommendation
Angle profile stainless steel properties:
| material |
V2A stainless steel |
| material thickness |
0.8 mm ± 0.1 mm |
| surfaces |
• natural (slightly shiny)
• brushed (matt)
• polished (high gloss) |
| thigh width |
approx. 22 mm |
Applications
Applications
Areas of application for the stainless steel l shaped tile edge trim:
angle profiles made of stainless steelare versatile and are used in various areas where a clean edge finish for the floor covering is required.
These profiles provide protection while giving the room a visually appealing look.
Processing
Processing
Processing of the stainless steel l shaped tile edge trim:
- Selecting the height of the profile:
Because the tile adhesive is slightly thick, the profile should be 1 - 2 mm higher than the thickness of the tile. This buffer is essential to achieve a clean, flush result when finishing your tiles. - Applying the tile adhesive:
Remove dust and dirt from the surface and then apply tile adhesive to the appropriate area using a notched trowel. - Attach profile:
Now press the punched leg of the profile into the adhesive bed and align the profile. The leg is then completely embedded in the adhesive. - Installing the tile:
The tile must be aligned flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile. - Filling the joint:
Finally, fill the joint completely with joint mortar.
A hacksaw or a grinder (use a new cutting disc) can generally be used for shortening.
Care advice
Care advice
Care instructions for the stainless steel l shaped tile edge trim:
Angle profiles made of high-quality V2A stainless steelare extremely easy to care for.
They do not require any special care and can be easily cleaned with pH-neutral cleaners. Avoid using aggressive or abrasive cleaning agents as these could damage the surface.
Wash the rails regularly with a soft cloth or sponge to remove dirt and fingerprints.
For stubborn dirt, we recommend allowing the cleaner to work for a few minutes and then rinsing thoroughly.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance
