Stainless steel non slip stair nosing trim

Areas of application of the stainless steel anti-slip nosing stairs:

With the step profile stainless steel anti-slip. You get a good solution for heavily used stairs, both indoors and outdoors.

Its versatility allows it to be used in a wide range of contexts - private, public and commercial. In addition, it has proven particularly useful in environments where high slip resistance is essential. Thanks to its R10/V4 slip resistance test, the profile ensures safety and stability, even on busy stairs.

Processing of the stainless steel non slip stair nosing profile:

1. Choosing the right height:
   It is important to ensure that the height of the profile is 1 - 2 mm higher than the thickness of the tile. This is because the tile adhesive will add a little extra thickness.
2. Applying the tile adhesive:
   Before applying the adhesive, make sure that the surface is free of dust and dirt. Then apply the adhesive using a notched trowel.
3. Attaching the profile:
   Now the punched leg of the stainless steel anti-slip step profile pressed into the adhesive bed. At the same time, align the profile. The leg is then completely embedded in the adhesive.
4. Installing the tile:
   The tile must be aligned flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile.
5. Fill the gap:
   Finally, fill the joint completely with joint mortar.

To shorten the stainless steel anti-slip step profile. A hacksaw or a grinder (use a new cutting disc) can be used.

This is how to maintain the stainless steel non slip stair nosing profile:

The profile is easy to maintain and does not require any special care.

Common, non-abrasive cleaners can be used for cleaning. However, make sure that they do not contain solvents, hydrochloric acid or hydrofluoric acid.