product description
product description
Self-adhesive sealing tape WS:
The self-adhesive sealing tape WS is part of the revolutionary WS sealing system, which makes the life of DIY enthusiasts and professionals easier.
This product avoids the traditional and laborious application of glue. Its easy handling and its standard-compliant and ETA-tested quality make it an indispensable addition to our self-adhesive waterproofing membrane WS.
Technical data
Technical data
Self adhesive waterproof sealing tape WS properties:
| Material |
Polyethylene |
| Color |
yellow |
| Width |
120 mm |
| Material strength |
0,5 mm |
Application
Application
Application area of the self-adhesive sealing tape:
The self-adhesive WS sealing tape provides a robust and reliable seal that protects against moisture and water damage and is applied in transition and corner areas.
Specially designed as an accessory for the self-adhesive WS sealing membrane.
processing
processing
Apply the self-adhesive sealing tape as follows:
Attach the molded parts for sealing the corners before the tape. The self-adhesive sealing tape is then applied one step before the self-adhesive WS waterproofing membrane is laid.
- Apply primer:
First of all, spray the previously cleaned surface with primer. If the substrate is highly absorbent, apply a little more. - Cut the self-adhesive sealing tape WS to the appropriate length:
Use a cutter to cut the tape to the appropriate length. - Applying the self-adhesive sealing tape WS:
First fold the tape once in the middle. Then partially remove the film on the back of one side and align the tape in the appropriate place. Now gradually press the tape onto the substrate, e.g. using a spirit level, and peel off the film.
For molded parts in the corner area, apply the self-adhesive sealing tape overlapping over these.
Care instructions
Care instructions
product safety
product safety
Angle profiles at a glance
Angle profiles at a glance
