product description
product description
Stainless steel non slip stair nosing trim:
Perfect for safe stair coverings - the stainless steel non-slip step profile.
This profile, made from robust stainless steel, offers excellent load capacity and durability, which is ideal for everyday use. The anti-slip surface improves safety by minimizing the risk of accidents.
With this high-quality step profile made of stainless steel you get an attractive, safe and durable step finish.
Note that the profile should be 1 - 2 mm higher than the tile.
Technical data
Technical data
Stainless steel step profile anti-slip:
material |
V2A stainless steel |
surface | nature |
overall width |
55 mm |
visibility |
30 mm |
Application
Application
Areas of application of the stainless steel anti-slip step profile:
With the step profile stainless steel anti-slip. You get a good solution for heavily used stairs, both indoors and outdoors.
Its versatility allows it to be used in a wide range of contexts - private, public and commercial. In addition, it has proven particularly useful in environments where high slip resistance is essential. Thanks to its R10/V4 slip resistance test, the profile ensures safety and stability, even on busy stairs.
processing
processing
Processing of the stainless steel step profile anti-slip:
- Choosing the right height:
It is important to ensure that the height of the profile is 1 - 2 mm higher than the thickness of the tile. This is because the tile adhesive will spread slightly. - Applying the tile adhesive:
Before applying the adhesive, make sure that the surface is free of dust and dirt. Then apply the adhesive using a notched trowel. - Attaching the profile:
Now the punched leg of thestainless steel anti-slip step profilepressed into the adhesive bed. At the same time, align the profile. The leg is then completely embedded in the adhesive. - Installing the tile:
The tile must be aligned flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile. - Fill the gap:
Finally, fill the joint completely with joint mortar.
To shorten the stainless steel anti-slip step profile. A hacksaw or a grinder (use a new cutting disc) can be used.
Care instructions
Care instructions
This is how to maintain the stainless steel step profile to prevent slipping:
The profile is easy to maintain and does not require any special care.
Common, non-abrasive cleaners can be used for cleaning. However, make sure that they do not contain solvents, hydrochloric acid or hydrofluoric acid.
product safety
product safety
Angle profiles at a glance
Angle profiles at a glance