product description
product description
Aluminium height leveling transition strip:
For a visually beautiful transition between two floor coverings with a small difference in height, our height compensation profile aluminum CLIP is ideal.
The item is a 3-part system consisting of base profile, fastening clips (red and yellow) and top profile. Because the top profile is attached using clips, no visible screws are visible after the system has been installed.
If the top profile is attached with the yellow clips, the profile can be used for coverings of 7 - 13 mm. For thicker coverings, the red clips included in the scope of delivery are also attached so that the profile can also be used for covering heights of up to 20 mm.
We offer two different versions in our shop: silver or titanium.
For floor coverings of the same height, we recommend the transition profile aluminum CLIP.
Technical data
Technical data
Aluminium height leveling transition strip properties:
For covering heights |
6 - 20 mm |
View width |
35mm |
Material |
Aluminium |
Strength |
approx. 1.2mm |
Surfaces |
•silver matt anodized • titanium matt anodized |
Scope of delivery |
• Base profile • Top profile • Plastic clips (yellow & red) |
Application
Application
Areas of application for the height adjustment profile Aluminium CLIP:
To connect two floor coverings with a slight difference in height, our height adjustment profile aluminum CLIP perfect. One area of application is often between doors as a partition between two rooms.
In general, they can be used in all private premises, but also in commercial areas.
processing
processing
Installation of the CLIP height adjustment profile made of aluminum:
With the appropriate tools, the height adjustment profile aluminum CLIP shortenable.
- Screwing the base profile:
First screw the base profile into the intended place in the floor. - Laying flooring:
Next, the floor covering must be laid properly. This is attached on both sides, partly over the base profile. - Attach clips:
Now slide the fastening clips onto the bar of the top profile. - Fix top profile:
Finally, the top profile must be placed in the base profile socket and fixed in place by gently tapping it in so that the top profile rests on the floor coverings everywhere.
Care instructions
Care instructions
How to maintain your CLIP height adjustment profile:
Dust and dirt can be easily removed with a soft cloth and mild cleaning agents. Sharp cleaning tools and aggressive cleaning agents should be avoided as they can damage the surface.
product safety
product safety
Angle profiles at a glance
Angle profiles at a glance