Product description
Product description
DURAL quarter circle profile made of black aluminum:
With our DURAL quarter circle profile in black you get a product that is suitable for various installation situations and guarantees you an elegant tile finish.
For laying the profiles around a corner, you will of course also find the appropriate molded parts in our shop, which can be ordered directly as accessories. A miter cut is not necessary.
For other colors or materials, look in the category Quarter circle profiles.
Remember to choose the profile height 1 - 2 mm higher than the thickness of the tile.
Our recommendation
Our recommendation
DURAL aluminium round edge tile trim black properties:
| Material |
Aluminium |
| Material thickness |
1 mm |
| Surface |
RAL 9005 Tiefschwarz pulverbeschichtet |
| Leg width |
approx. 22 mm |
Applications
Applications
Areas of application for the black DURAL aluminum quarter circle profile:
These profiles are used for a clean tile finish in various rooms such as kitchens, living rooms or hallways.
Black aluminum quarter circle profiles are versatile and ideal for modern interiors where a neat tile finish is required. Other coverings can of course also be finished with these profiles.
Thanks to the anodized finish of the aluminium, the profiles can also be used in bathrooms, where they offer a durable solution despite high moisture and water exposure.
Processing
Processing
Processing the DURAL quarter circle profile aluminum black:
- Select the correct height:
Make sure that the profile is selected 1 - 2 mm higher than the thickness of the tile. This is due to the tile adhesive, which is slightly thicker. This calculated margin is required for a flush end result. - Spread the tile adhesive:
The tile adhesive must now be applied with a notched trowel to the substrate, which has previously been cleaned of dirt and dust. - Attach the black aluminum quadrant profile:
The profile is now pressed into the adhesive bed with the punched leg and then aligned. Finally, embed the leg completely. - Attach the tile:
Press the tile firmly into the adhesive and align it flush to a height with the top edge of the profile and a joint of 2 - 3 mm to the profile. - Fill the joint:
Finally, fill the joint completely with the joint mortar.
If necessary, shorten the profiles, e.g. with a hacksaw.
Care advice
Care advice
How to care for your DURAL black aluminum quadrant profile:
No special care is required; the profile can be cleaned with a mild detergent. Abrasive or corrosive cleaning agents should not be used.
Angle profiles at a glance
Angle profiles at a glance
