Product description
Product description
DURAL brass straight edge tile trim:
For areas where tile edges are exposed to extreme loads or heavy use, our DURAL angle profile brass is ideal. This robust profile is a reliable tile finish, especially in industrial operations where the use of chemicals is possible.
There are no special corner pieces for the profile, so they have to be mitred in the corner area.
Even in demanding environments - with the DURAL angle profile brass, tiles are protected in the long term and still have a visually appealing finish.
Select the profile height 1 - 2 mm higher than the thickness of your tile covering.
In the category Angle profiles you will find other materials.
Our recommendation
Our recommendation
DURAL brass straight edge tile trim properties:
| Material |
Brass alloy |
| Material thickness |
1 mm |
| Surface |
natural (slightly glossy) |
| Leg width |
approx. 22 mm |
| Length |
250 cm |
| Visible width |
3 mm |
Applications
Applications
Areas of application for brass angle profiles from DURAL:
The DURAL brass angle profile is an all-rounder and can be used in a variety of ways.
Due to the robustness of these profiles, they are particularly suitable for use in industrial operations, as they are highly resistant to chemicals.The profiles are of course also used in living spaces. With the DURAL brass angle profile, a clean tile finish and protection of the tile edges is guaranteed.
Processing
Processing
Processing the DURAL brass angle profile:
- Selecting the correct height of the DURAL brass angle profile:
Ensure that the profile is selected 1 - 2 mm higher than the thickness of the tile. This buffer is necessary as the tile adhesive will spread a little. - Applying tile adhesive:
First remove dust and dirt from the substrate and then apply the tile adhesive to the appropriate area using a notched trowel. - Attaching the profile:
Now you can press the DURAL brass angle profile with the punched leg into the adhesive bed and align it. Then embed the leg completely in the adhesive. - Attaching the tile:
The tile is now aligned flush with the upper edge of the profile and with a joint of 2 - 3 mm to the profile. - Filling the joint:
The joint is finally filled completely with grout.If necessary, the DURAL Angle Profile Brass can be shortened. A hacksaw, for example, can be used for this purpose.
Care advice
Care advice
The right care for the DURAL brass angle profile:
If necessary, the DURAL brass angle profile can simply be wiped down with mild cleaning agents and a cloth. It is important to ensure that no aggressive or abrasive cleaning agents are used. Regular cleaning and careful treatment will ensure that the profile retains its attractive appearance.
Angle profiles at a glance
Angle profiles at a glance
