product description
product description
DURAL stainless steel straight edge tile trim:
Our DURAL angle profile stainless steel is available in three different versions: matt brushed, shiny polished and natural (slightly shiny). All surfaces except natural are supplied with a protective film to protect the machined surface.
These L-shaped profiles are a proven all-rounder when it comes to neatly finishing and protecting tile edges. The DURAL stainless steel angle profile can also be used to protect and finish other floor coverings. Thanks to the heights of 2 to 30 mm, the product is versatile.
When laying around a corner, the profile must be mitred, as there are no corner pieces for this.
You must choose the profile height 1 - 2 mm higher than the thickness of your tile.
You can find samples of the profiles for preview in the linked accessories. The sample pieces always have a height of 10 mm. Please note that the punching of the leg may differ for these.
For other versions of the angle profiles, just look in the category of the same name.
Technical data
Technical data
DURAL stainless steel straight edge tile trim Properties:
| Material |
V2A stainless steel |
| Material strength |
0,8 mm ± 0,1 mm |
| Surface |
• nature (slightly shiny)
• brushed (matt)
• Polished (high gloss) |
| Leg width |
ca. 22 mm |
| Length |
250 cm |
Application
Application
Areas of application for your DURAL stainless steel edge tile trim profile:
The DURAL stainless steel edge tile trim profile is ideal for a wide range of applications. Wherever you need a clean edge finish for your flooring, this is the right profile for you.
For example, the profiles are ideal for stair nosings, flooring separations and the edging of various coverings.
processing
processing
How to process the DURAL stainless steel edge tile trim profile:
- Select the height of the profile:
The profile should be selected 1 - 2 mm higher than the thickness of the tile due to the slightly thicker tile adhesive. This buffer is essential to achieve a clean, flush finish on your tile edge. - Application of the tile adhesive:
Remove dust and dirt from the substrate and then apply tile adhesive to the corresponding area using a notched trowel. - Attach the profile:
Now press the punched leg of the DURAL stainless steel angle profile into the adhesive bed and align the profile. The leg is then completely embedded in the adhesive. - Attach the tile:
The tile must be aligned flush with the top edge of the profile and with a joint of 2 - 3 mm to the profile. - Filling the joint:
Finally, fill the joint completely with grout.
A hacksaw or an angle grinder (use a clean cutting disc) can be used to shorten the DURAL stainless steel angle profile.
Care instructions
Care instructions
Care instructions for the DURAL stainless steel edge tile trim profile:
Our DURAL stainless steel edge tile trim profiles are easy to clean and can be easily cleaned with pH-neutral cleaning agents. Aggressive, abrasive cleaners should be avoided.
Dust and dirt can be removed from the profile with the appropriate cleaner and a soft cloth, ensuring that the profiles retain their elegant appearance for a long time.
product safety
product safety
Angle profiles at a glance
Angle profiles at a glance
