Product description
Product description
Base set MyVarioLine:
The substructure set is a partial component of the two-part MyVarioLine shower channel system. With the easy-to-install EPS core, the set can be installed quickly and safely.
It consists of a horizontal DN50 drain, two EPS mounting blocks, a sealing flange according to ETA-20/0838, several spacer plates and the connecting thread for connecting the drain channel.
The substructure is available in our shop in lengths of 60 cm, 70 cm, 80 cm, 90 cm and 100 cm.
To complete the shower channel system, we offer suitable accessories.
Our recommendation
Our recommendation
Base set MyVarioLine features:
| visible dimension |
60 - 100 cm |
| installation height |
• 68 mm (standard drain)
• 88 mm (with performance drain)
• 190 mm (vertical drain) |
| material | EPS, V2A stainless steel |
| Sequence | DN 50 |
| scope of delivery | • Drain DN50 with odor trap
• EPS mounting block
• Sealing flange
• Spacers for tile thicknesses of 6 - 21mm
• Connection thread for drain channel
• Hair strainer
• Removal aid for design grate |
Applications
Applications
Areas of application of the MyVarioLine substructure set:
Our substructure set in conjunction with the appropriate shower drain is used for floor-level showers.
Above all, the corresponding channels with their different patterns integrate perfectly into modern, floor-level showers.
Processing
Processing
Installation of the MyVarioLine substructure set:
- Determine the height of the finished tile covering:
To do this, take into account the finished wall area and the 2% gradient of the planned screed. In addition, the height of the subfloor including insulation, screed thickness, wall/floor joint and planned tile thickness must be taken into account. - Adjust the height of the sealed base body:
Use spacers to adjust the required height for the gutter. - Shower drain assemble:
Now the gutter without the design grate is screwed onto the yellow, sealed base body using the assembly aid and tightened. - Placing the gutter system:
Cut out the screed in the shower area and align and position the channel to the planned height using tile adhesive. The gutter body must be completely level. - Check drain:
The drain is now connected to the pipes and checked for leaks. - Finishing the screed:
Then underline the drain and lay the screed with a 2% gradient towards the gutter. - Sealing the gutter:
After the screed has dried sufficiently, the sealing sleeve connected to the gutter is properly incorporated into the surrounding sealing system. We also offer products for sealing in our shop. - Laying tiles:
The tiles can now be attached to the professionally sealed shower area. If necessary, the height of the structure can now be adjusted again by placing additional spacers in the base tray under the channel.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance
