Product description
Product description
Starterkit self adhesive waterproof membrane for shower:
This starter kit contains everything needed for a reliable seal.
The kit consists of a high-quality self-adhesive waterproofing membrane WS with an area of 10 m² and essential accessories.
With the starter kit self-adhesive waterproofing membrane WS, your bathroom can be sealed quickly and easily. There is no need for the laborious application of glue, saving time and effort. The individual components of the kit can be easily attached without creating dust or dirt. This means that the work phases always remain clean and free of dirt.
Our recommendation
Our recommendation
Starter Kit WS features:
| Contents Starter Kit |
• Sealing membrane: 10 m²
• Sealing tape: 10 m
• Inside corner: 1 piece
• Fleece: 10 m
• Primer: 500 m |
Applications
Applications
Areas of application of the WS starter kit waterproof shower membrane:
With the starter Kit WS howers, bathtubs, sinks and other areas can easily be sealed to prevent moisture and water from penetrating the building structure.
Processing
Processing
This is how the self-adhesive waterproof shower membrane is processed:
- Prepare the surface:
In the first step, the surface to which the self-adhesive waterproofing membrane.The surface to be covered must be cleaned of dirt and dust. The surface is then cleaned with primer sprayed. For highly absorbent surfaces, use a little more primer. Leveling measures must be carried out beforehand. - Attaching moldings such as corners and cuffs:
After the surface has been properly prepared, the necessary molded parts are first attached. To do this, simply remove the film on the back and press the corresponding molded part onto the wall. Smooth out as many bubbles as possible with a squeegee. - Sealing transition and corner areas:
For this purpose, the sealing tape self-adhesive WS. Again, simply peel off the film on the back and use a squeegee or spirit level to press the tape into the corner areas. - Apply self-adhesive waterproofing membrane WS:
Now the cut self-adhesive sealing strips by first removing the middle strip on the back of the sheet. Now align the sheet in the appropriate place. Make sure that the dark yellow areas of the molded parts are overlapped. Once the sheet is in position, the film on the back can now be carefully peeled off and at the same time any bubbles can be removed with a squeegee. Always apply further sheets overlapping the dark yellow edge strip of the previous sheet so that these areas are covered with fleece. - Dark yellow border stripes with fleece strips complete:
Before you can start laying the tiles, any dark yellow edge strips that may still be present must be covered with the self-adhesive strip.
Once the waterproofing has been completely applied, you can start laying the tiles straight away.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance
