A 30m²
During renovation work, you often come across surfaces that are not sufficiently stable to lay new floor coverings. In addition to damage to the subsurface, you often find that the construction height is too low and you have to deal with complex renovation methods.
The reinforcement mat FGT from DURAL was specially developed to effectively reinforce the substructure of floors and walls. Cracks caused by construction errors or weakness in the material are held together with the help of the reinforcement mat. A further expansion of the cracks is no longer possible. This process is a complete stiffening of the subsurface, which is referred to as “reinforcement”.
In the category decoupling mats we offer further products to prepare your surface.
| Length | 30 m |
|---|---|
| Width | 1 m |
| Total area | 30 m² |
| Strength | 1,5 mm |
| Point load | 15,56kN/4cm² |
| Adhesive tensile strength | 0,11kg/mm² |
Due to the glass fibres contained in the mat, safety gloves must be worn when laying the mat.
Indoors, the tiles can be laid using the thin-bed method immediately after the mat has been bonded. For this purpose, it is advisable to fill the recesses in the mat in a single operation and then comb the thin-bed mortar with the toothing.
For external coverings, do not start laying tiles until the levelling compound has hardened. Protect the material from prolonged exposure to sunlight.
The FGT reinforcement mat is ideal for laying on substrates with insufficient load-bearing capacity, such as:
The mat ensures complete reinforcement of the substrate, guaranteeing long-term stability and safety.
DURAL GmbH
Südring 11
56412 Ruppach-Goldhausen – Germany
E-Mail: info@dural.de
