Free shipping from €600 within Germany
Delivery time: 1–3 days within Germany
More than 2,000 products

DURAL self-leveling paving pedestal BA

Joint width 2mm / H 47-165mm

Product Details

Article No. A0003329
Manufacturer EAN 4018448096512
Content 1.0 pcs.  | 4,83 € / item
Availability In stock

4,83 €

incl. 23% VAT plus shipping

Delivery time: 1–3 days within Poland

Order matching accessories directly

Extension piece for paving pedestal BA

Extension piece for paving pedestal BA

1,37 €

incl. 19% VAT plus shipping

Learn more
Anti-slip pad for paving pedestal

Anti-slip pad for paving pedestal

2,10 €

incl. 19% VAT plus shipping

Learn more

Total price

0,00 €

incl. 23% VAT plus shipping

Self-leveling DURAL pedestal BA:

The DURAL self-leveling pedestals BA are suitable for laying terrace slabs, tiles and other ceramic tiles.

With their self-leveling function and automatic slope compensation of up to 5%, they enable easy and precise installation. The system is based on an intelligent plug-in principle that enables problem-free configuration and installation.

These bearings complement the heights of the self-leveling paving pedestal MB. There are three different, height-adjustable versions:

  • 47 - 62 mm
  • 77 - 112mm
  • 133 - 165mm

DURAL self-leveling pedestals BA are specially developed for outdoor use and are mainly used on balconies and terraces. Just make sure that the panels have a minimum thickness of 2 cm.

DURAL self-leveling paving pedestal BA properties:

Material Plastic
Joint width 2 mm
Top contact surface ⌀ 120 mm
Bottom contact surface ⌀ 190 mm
Load capacity up to 400 kg

Craft tools

Alle anzeigen
Square notch trowel 280 x 140 mm Square notch trowel 280 x 140 mm – View 2
Available

Square notch trowel 280 x 140 mm

10,00 €

incl. 19% VAT plus shipping

Learn more

Installation of DURAL pedestal supports BA:

If required, an extension piece can be screwed into each support.

Depending on the size of the slab, a different number of supports per slab must be used.

  1. Preparation of the substrate: The substrate must be load-bearing. Suitable substrates are e.g. concrete, wood or grit/gravel. When used in grit/gravel, 40 x 40 cm base plates must be installed. Depending on the construction situation, the substrate must also be properly sealed in advance and a DR100++ drainage membrane laid if necessary.
  2. Positioning the pedestals: Start positioning the pedestals in a corner and adjust the height accordingly. Check the height for evenness using a spirit level.
  3. Laying the slabs: Finally, lay the slabs.

The lower support surfaces can be sawn off in the edge area so that they do not protrude sideways.

Additional Product Safety Information

Manufacturer

DURAL GmbH
Südring 11
56412 Ruppach-Goldhausen – Germany
E-Mail: info@dural.de