Product description
Product description
DURAL gradient wedge made of stainless steel for the wall connection:
The DURAL gradient wedge stainless steel wall connection is a high-quality product for the shower.
This wedge rail for wall connection is easy to use and ideal for the side panels of floor-level showers. The finely ground surface not only gives an attractive look, but also ensures a clean and seamless transition to the wall/floor covering.
This article provides an efficient solution for floor-level showers.
Look at the drawing of the queen to choose the correct side. The height of the profile should be 1 - 2 mm higher than the thickness of the wall tile.
You can find all other profiles for your shower in the category Shower Profiles.
Our recommendation
Our recommendation
DURAL slope profile for wall connection properties:
| Material |
V2A stainless steel |
| Material thickness |
1 mm ± 0,1 mm |
| Surface |
brushed (matt) |
| Gradient |
2 % |
| Height 1 (max. Covering thickness) |
• 8 mm
• 10 mm
• 12,5 mm |
| Height 2 |
• 9 mm
• 11 mm
• 13,5 mm |
| Height 3 |
• L98 cm = 24 mm
• L120+148 cm = 32 mm
• L200 cm = 40 mm |
Applications
Applications
Area of application of the slope profile for wall connection:
The slope profile for wall connection in the shower is specially manufactured for level-access showers. They are designed for installation directly on the side wall of the shower, making this product ideal for new installations or renovation work in bathrooms where a modern shower solution is required.
Processing
Processing
How to install the DURAL slope wedge for the wall connection:
The shower area must be sealed in advance. We offer corresponding articles in the bathroom waterproofing category
To shorten the profile, always cut at the highest point. This can be done using a hacksaw or an angle grinder with a fresh cutting wheel, for example.
- Selecting the side:
Select the side facing the lowest point of the shower. - Apply tile adhesive:
Apply tile adhesive to the waterproofing with a 4 x 4 mm notched trowel. - Attach profile:
Press the profile with the perforated support leg into the fresh adhesive bed and align. - Lay tiles:
Align the wall tiles adjacent to the profile so that the top edge of the slope profile is flush with the tile. Maintain a connection joint of 1.5 mm to the profile. - Filling joints:
Fill the free joint space with grout.
Care advice
Care advice
Care instructions for your DURAL gradient wedge stainless steel wall connection:
Our DURAL gradient wedge stainless steel wall connection does not require any special care, but if cleaning is necessary, we recommend using mild cleaning agents. Carefully wipe the profile without using aggressive chemicals or abrasive cleaners.
Angle profiles at a glance
Angle profiles at a glance
