Product description
Product description
DURAL aluminium straight edge tile trim titan
Versatile and elegant for your tile finish - the DURAL aluminium straight edge tile trim titan. In addition to the tile finish, the profile can also be used as a carpet or parquet finish protection.
The titanium color is achieved by anodizing the aluminum. The thin anodized layer results in increased corrosion protection, which also enables the profile to be used in the bathroom.
There are no special corner pieces for the profile. In order to lay your DURAL angle profile aluminum titanium around a corner, it must be mitred.
In addition to this profile, you can also find other DURAL profiles made of aluminum and other materials in the straight edge tile trim category.
The profile height must be selected 1 - 2 mm higher than the thickness of your tile.
Our recommendation
Our recommendation
DURAL aluminium straight edge tile trim titan Properties:
| Material |
Aluminium |
| Material strength |
1,1 mm |
| Surface |
titanium matt anodized |
| Leg width |
ca. 22 mm |
| Lengh |
250 cm |
Applications
Applications
Application areas of the DURAL aluminium straight edge tile trim titan:
The unique titanium of the profiles perfectly complements any room.
The DURAL aluminium straight edge tile trim titan are a highlight in any room, whether in a private or commercial environment.
The anodized surface of the profiles provides increased corrosion protection, which means that the profiles can also be used in bathrooms without hesitation.
Processing
Processing
Process DURAL aluminium straight edge tile trim titan correctly:
- Choose the right height for your profile:
Due to the adhesive that is applied, it is important that the profile is selected 1 - 2 mm higher than the thickness of the tile. This buffer must be taken into account to ensure a clean, flush result for your tile finish. - Apply tile adhesive:
Remove dust and dirt from the substrate and apply tile adhesive to the corresponding area using a notched trowel. - Attach the DURAL aluminium straight edge tile trim titan:
Press the punched leg of the DURAL aluminium straight edge tile trim titan into the adhesive bed and align it. The leg is then completely embedded in the adhesive. - Attach the tile:
The tile is aligned flush with the top edge of the profile and with a joint of 2 - 3 mm to the profile. - Fill the joint:
Finally, fill the joint completely with grout.
The profiles can be shortened with a hacksaw if necessary.
Care advice
Care advice
How to clean your DURAL aluminium straight edge tile trim titan:
Maintaining the profile is extremely easy.
All you need is a soft cloth and pH-neutral cleaning agent. Avoid aggressive chemicals. Dirt and dust can be easily removed from the profiles with a cloth and cleaning agent.
Angle profiles at a glance
Angle profiles at a glance
