Aluminium round edge tile trim silver

Areas of application for the aluminium round edge tile trim silver:

Whether in the living room, kitchen or hallway,quarter-circle profiles aluminum silver ensure a harmonious and clean finish to tile coverings.

Aluminum quarter circle profiles silver are versatile and ideal for modern interiors where a neat tile finish is required. Of course, other coverings can also be covered with them.

Due to the anodizing of the aluminum, the profiles have increased corrosion protection and can also be used in bathrooms, where they offer a long-lasting solution despite high humidity and water exposure.

Wherever tiles are laid and a clean finish is desired, our profile offers a reliable and aesthetically pleasing solution.

Processing of the tile trim round aluminum silver:

1. Selection of height:
   Make sure in advance that the profile is selected 1 - 2 mm higher than the thickness of the tile. This is because the tile adhesive adds a little extra thickness. The buffer factored in ensures a clean and flush result.
2. Spreading tile adhesive:
   The tile adhesive is now applied to the surface, which has previously been cleaned of dirt and dust, using a notched trowel.
3. Attaching the quarter-circle profile aluminum silver:
   The profile is now pressed into the adhesive bed with the punched leg and then aligned. Finally, the leg is completely embedded.
4. Installing the tile:
   Press the tile firmly into the adhesive and align it flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile.
5. Filling the joint:
   Finally, fill the joint completely with the joint mortar.

If necessary, shorten the profiles, e.g. with a hacksaw.

The right care for the silver tile trim round made of aluminum:

The profile does not require any special care.

The profile can be cleaned with mild detergents. Abrasive or corrosive cleaning agents should not be used to protect the surface and maximize the life of the product.