PVC round edge tile trim

Areas of application for the pvc round edge tile trim:

PVC quarter-circle profiles are primarily used in rooms and areas that are not exposed to high levels of stress.

They are suitable for visually enhancing floor covering finishes and for protecting the associated edges.

Their area of ​​application is mainly limited to indoor areas, ranging from residential areas to commercial interiors with low levels of stress.

Processing of the pvc round edge tile trim:

1. Choose the appropriate height for the profile:
   First of all, it is important to choose a profile that is 1 - 2 mm higher than the thickness of the tile. This is because the adhesive will be slightly thicker.
2. Spreading tile adhesive:
   The surface is now cleaned of dust and dirt. Then apply the tile adhesive to the appropriate place using a notched trowel.
3. Attaching the quarter-circle profile PVC:
   The punched leg of thequarter-circle profile PVCis now pressed into the adhesive bed. Then align the profile. The leg is then completely embedded in the adhesive.
4. Installing the tile:
   The tile must be aligned flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile.
5. Filling the joint:
   Finally, fill the joint completely with joint mortar.

Quarter-circle profiles PVC can easily be shortened if necessary.

Care instructions for the round edge plastic tile trim:

Our quarter-circle profile PVC requires no special care.

If necessary, it can be wiped down with mild detergents and a soft cloth. Please avoid using abrasive cleaners or scouring pads as these could damage the material.

With this simple care, the quarter-circle profile PVC long-lasting and functional.