Aluminium formable straight edge tile trim silver

Areas of application for the angle profile for bending made of anodized aluminum:

This flexible profile adapts effortlessly to the requirements of your construction project.

Perfect for finishing off interior tiles or flooring that have been laid with a rounded edge.

Processing of the bendable angle profile made of anodized aluminum:

1. Select profile height:
   Choose a profile that is 1 - 2 mm higher than the thickness of the tile. This will ensure a flush and clean result.
2. Apply tile adhesive:
   The surface must first be cleaned of dust and dirt. Then, using a notched trowel, apply tile adhesive to the spot where the profile is to be placed.
3. Angle profile for bending aluminum silver:
   The serrated leg of the profile is now pressed into the adhesive bed and the profile is aligned. Then the leg is completely embedded in the adhesive.
4. Laying the tile:
   Then align the tile flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile.
5. Fill the gap:
   Finally, fill the gap between the profile and the tile completely with grout.

If necessary, A hacksaw is sufficient to shorten the profile.

The use of a Curver simplifies the bending of the profiles, but is not absolutely necessary.

Care instructions for the bendable angle profile made of anodized aluminum:

The matt anodized surface of the profile is easy to clean and resistant to corrosion.

A soft cloth and, if necessary, mild soapy water are usually sufficient for cleaning. Avoid abrasive cleaning agents or rough sponges to keep the surface intact and preserve its aesthetic appeal.