Product description
Product description
L-shaped balcony profile made of stainless steel:
L-shaped balcony profiles made of stainless steel are used in the free edge areas of balconies and terraces, in conventional mortar beds or on existing sloped screed. The balcony construction is clad at the bottom with an L-shaped profile, which is why this special profile is also known as a balcony angle.
The profile is available in a width of 80 mm and in heights of 55 mm, 75 mm or 95 mm.
Of course we also offer suitable accessories in our shop. In our category Balcony profiles you will also find other profiles for terraces or balconies.
Our recommendation
Our recommendation
L-shaped stainless steel balcony tile edge trim features:
| Material |
Stainless steel |
Material thickness |
1 mm |
| Surface |
natur |
| Support leg |
80 mm |
| Length |
300 cm |
Applications
Applications
Areas of application for the stainless steel L-shaped balcony edging profile:
The profile offers an elegant edging solution for balconies and terraces, while at the same time protecting against harmful environmental influences.
Processing
Processing
How to install the stainless steel L-shaped balcony profile:
The profiles can be shortened using a hacksaw or Flex (use a fresh cutting disc), for example.
The corresponding connectors are required to connect two profiles.
Installing the stainless steel L-shaped balcony profiles in the mortar bed:
- Prepare the substrate accordingly (level out, remove dirt and incorporate a slope if necessary)
- Seal the substrate.
- Apply hydraulically setting tile adhesive to the edge of the balcony using a 4 x 4 mm notched trowel.
- Align and embed the stainless steel L-shaped balcony profile in the tile adhesive bed.
Fix the stainless steel L-shaped balcony profile with screws:
- Prepare the substrate again as described
- Seal the substrate
- Screw the profile to the edge area of the balcony or terrace at the pre-drilled points.
Care advice
Care advice
The right care for your L-shaped stainless steel balcony profile:
To preserve the long-lasting beauty of the stainless steel, the profile should be cleaned regularly with a mild cleaning agent and a soft cloth, avoiding abrasive cleaning agents to prevent scratches on the surface.
Angle profiles at a glance
Angle profiles at a glance
