Shower waterproof membrane 30 m

Lay the shower waterproof membrane 30 metres:

1. Prepare the substrate: The first step is to ensure that the floor is free of dirt, stable and level. Levelling measures must be carried out before the mat is laid.
2. Apply thin-bed mortar: Thin-bed mortar is now applied using a 4 x 4 mm notched trowel. Either hydraulically setting flexible mortar or quick-setting flexible adhesive (DIN EN 12004 /C2) can be used for this.
3. Attaching the strips: Embed the sheets cut to size with the non-printed side fully into the adhesive. Then press out any air pockets. Mat joints must be laid with an overlap of at least 5 cm. The overlap must be glued watertight.
4. Seal pipe connections, transition areas and corners with moulded parts: Use our sealing strip WP, the appropriate sealing corner and ET-S pipe collars to seal the areas mentioned.

Once all the components have been installed, you can start laying the tiles using the thin-bed method without any waiting time.

Areas of application for the 30 m shower waterproof membrane:

Our sealing mat can be used indoors for bonded sealing with tile coverings on walls and floors.

The sealing mats offer secure adhesion to the substrate and are easy to apply.

Informations complémentaires sur la sécurité du produit

Fabricant

Tirocco.com GmbH
Maximiliansplatz 15
80333 München - Allemagne
E-mail : service@tirocco.com