DURAL aluminium round edge tile trim black

Processing the black round edge tile trim:

1. Select the correct height: Make sure that the profile is selected 1 - 2 mm higher than the thickness of the tile. This is due to the tile adhesive, which is slightly thicker. This calculated margin is required for a flush end result.
2. Spread the tile adhesive: The tile adhesive must now be applied with a notched trowel to the substrate, which has previously been cleaned of dirt and dust.
3. Attach the black aluminum quadrant profile: The profile is now pressed into the adhesive bed with the punched leg and then aligned. Finally, embed the leg completely.
4. Attach the tile: Press the tile firmly into the adhesive and align it flush to a height with the top edge of the profile and a joint of 2 - 3 mm to the profile.
5. Fill the joint: Finally, fill the joint completely with the joint mortar.

If necessary, shorten the profiles, e.g. with a hacksaw.

Areas of application for the black DURAL tile round edge trim:

These profiles are used for a clean tile finish in various rooms such as kitchens, living rooms or hallways.

Black aluminum quarter circle profiles are versatile and ideal for modern interiors where a neat tile finish is required. Other coverings can of course also be finished with these profiles.

Thanks to the anodized finish of the aluminium, the profiles can also be used in bathrooms, where they offer a durable solution despite high moisture and water exposure.

How to care for your black round edge tile trim:

No special care is required; the profile can be cleaned with a mild detergent. Abrasive or corrosive cleaning agents should not be used.

Informations complémentaires sur la sécurité du produit

Fabricant

DURAL GmbH
Südring 11
56412 Ruppach-Goldhausen – Allemagne
E-mail : info@dural.de