DURAL brushed aluminium square edge tile trim titan

The correct processing of the titanium brushed box trim tile:

1. The right choice of height for your DURAL square profile aluminium titanium brushed: The profile should be 1 - 2 mm higher than the thickness of your tile. This buffer must be taken into account so that the tile and profile can be aligned flush with each other. The reason for this is that the tile adhesive will be slightly raised.
2. Apply tile adhesive: First remove dust and dirt from the substrate and then apply the tile adhesive with a notched trowel.
3. Attaching the DURAL square profile in brushed titanium aluminium: The profile is then aligned with the punched leg in the adhesive bed and pressed in. Then embed the leg completely.
4. Attach the tile: The tile is now pressed firmly into the adhesive and aligned flush with the top edge of the profile and a joint of 2 - 3 mm to the profile.
5. Close the joint: The joint is then completely filled with grout.

If necessary, shorten the profiles, e.g. with a hacksaw.

Areas of application for the DURAL box square edge tile trim aluminium titanium brushed:

Whether in the living area, kitchen or bathroom - this profile gives you a clean tile finish.

The DURAL square profiles in brushed titanium aluminium can be used in any modern room, including bathrooms thanks to their corrosion protection.

Care instructions for the DURAL box trim for tiles aluminium titanium brushed:

In general, no special care is required for the DURAL square edge tile trim aluminium titanium brushed.

It is sufficient to use a commercially available cleaning agent with a neutral pH value to wipe the profiles and preserve their unique appearance.

Additional Product Safety Information

Manufacturer

DURAL GmbH
Südring 11
56412 Ruppach-Goldhausen – Germany
E-Mail: info@dural.de