Product description
Product description
Aluminium straight edge tile trim silver
The aluminium straight edge tile trim silver stands out with its matt look and is suitable for protecting your tile edges. At the same time, it gives it a clean finish and can be integrated into many contexts with its timeless silver color. L-shaped profiles made of silver aluminum are robust and effectively protect tile edges from external stress.
They can also be used to finish carpet and adhesive parquet surfaces. In corner areas, the Aluminium angle profiles silver are mitred cut, as there are no specially manufactured corner pieces.
The height of the profile should be 1 - 2 mm higher than the thickness of the tile.
You can also find further angle profiles made of other materials and with other surfaces from us.
You can order a 10 mm high sample for preview from the accessories section.
Our recommendation
Our recommendation
Aluminium straight edge tile trim silver Properties:
| Material |
Aluminium |
| Material strength |
1 mm |
| Surface |
silver matt anodised |
| Leg width |
ca. 22 mm |
Applications
Applications
Areas of application for the silver aluminium straight edge tile trim:
The Aluminium straight edge tile trim silver is a profile with a wide range of possible applications.
They are ideal for interiors where a clean tile finish is required.
Due to their increased corrosion protection, thanks to the anodisation, these silver aluminium tile rails are also suitable for use in bathrooms.
Processing
Processing
Processing of the anodised aluminium straight edge tile trim silver:
- Height selection of the profile:
Select the profile 1 - 2 mm higher than the thickness of the tile. This ensures a flush and clean result. - Application of the tile adhesive:
Firstly, the substrate must be cleaned of dust and dirt. Then apply tile adhesive to the corresponding area using a notched trowel. - Attaching the profile:
Press the punched side of the profile into the adhesive bed and align the profile. The leg is then completely embedded in the adhesive. - Laying tiles:
Now align the tile flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile. - Fill the joint:
Finally, fill the joint between the profile and the tile completely with grout.
A hacksaw can be used to shorten the Aluminium straight edge tile trim silver.
Care advice
Care advice
Care instructions for the straight edge tile trim profile made of silver anodised aluminium:
No special care is required. It can simply be cleaned occasionally with mild detergents and a soft cloth.
Abrasive cleaning agents should be avoided so as not to damage the surface. With the right care, the Aluminium straight edge tile trim silver will retain its shine and robustness for years to come.
Angle profiles at a glance
Angle profiles at a glance
