Product description
Product description
Aluminum cover profile:
Cover joints with this flexible aluminium cover profile. You can even get the profile from us in a width of 120 mm, so that even large joints can easily disappear behind its clean look.
You can choose between anodized or natural, untreated aluminum. The clean and visually appealing surface of both versions adapts to a wide variety of environments.
You can also choose between drilled, undrilled and self-adhesive profiles - the product is ideal for subsequent installation. Here you will definitely find your ideal cover profile made of aluminum.
Our recommendation
Our recommendation
Aluminum cover profile features:
| Material |
Aluminium |
| Surfaces | • Natural aluminum
• silver matt anodized |
| Length |
250 cm |
| Height |
3,5 mm |
Applications
Applications
Areas of application for the aluminum cover profile:
This profile is mainly used to cover joints easily and attractively. There are no limits to the possible applications. The profiles can be used both indoors and outdoors.
Processing
Processing
How to install the aluminum cover profile:
As already mentioned, you can choose between a drilled, an undrilled and a self-adhesive version, whereby the installation varies depending on the version.
The profiles can be easily shortened with the appropriate tools.
Processing self-adhesive cover profile:
- First cut the profile to the length that suits you
- Make sure that the surface to which the profile is to be glued is free of dirt
- Press the profile firmly into the intended position
Processing drilled cover profile:
- Shorten the profile to suit you
- Place the profile in the intended position and mark the floor/wall through the pre-drilled holes
- Drill holes in the floor/wall at the markings
- Drill appropriate dowels into the freshly drilled holes
- Screw the profile in place
Processing cover profile undrilled:
- Shorten the profile to the correct length
- Predrill the profile at the intended points
- Place the profile at the intended point and mark the floor/wall through the predrilled holes
- Drill holes in the floor/wall at the marked points
- Drill appropriate dowels into the freshly drilled holes
- Screw the profile in place
Care advice
Care advice
The right care for your aluminum cover profile:
Not much is needed to clean the profile. Make sure that you use mild cleaning agents and a soft cloth with which you can easily remove dust and dirt, but you should avoid aggressive cleaning agents. These could damage the surface.
Angle profiles at a glance
Angle profiles at a glance
