Product description
Product description
Angle profile made of natural brass:
The straight edge tile trim brass natural is suitable for areas where tile edges are exposed to extreme loads or heavy use. It is an extremely robust profile that serves as a reliable tile finish, particularly in industrial operations where the use of chemicals is possible.
Our profile ensures high stability and offers reliable protection for the tile edges, even under demanding conditions. The brass angle profile ensures that the tiles remain protected and aesthetically pleasing in the long term, even in demanding environments. In the corner area, the profiles must be mitered.
For more straight edge tile trim, you can look around in the corresponding category. Here you will find a selection of other materials as well as surfaces and colors.
The profile height should be chosen 1 - 2 mm higher than the thickness of the tile.
Our recommendation
Our recommendation
brass-straight-edge-tile-trim nature Properties:
| Material |
Brass alloy |
| Material strength |
1 mm |
| surface |
natural (slightly glossy) |
| Leg width |
ca. 22 mm |
| Length |
250 cm |
| Visible width |
3 mm |
Applications
Applications
Areas of application for the brass-straight-edge-tile-trim nature:
The straight-edge-tile-trim are extremely versatile.
They are used in living areas to achieve a clean tile finish and at the same time protect the tile edges from increased stress.
These profiles are also ideal for use in industrial operations as they are highly resistant to chemicals.
Processing
Processing
Processing of the Brass straight edge tile trim:
- Select the correct height for your profile:
Due to the tile adhesive, which is slightly thicker, it is important to ensure that the profile is 1 - 2 mm higher than the thickness of the tile. - Application of the tile adhesive:
Once you have removed dust and dirt from the substrate, you can apply the tile adhesive to the relevant area using a notched trowel. - Attach the profile:
Now press the natural Brass straight edge tile trim into the adhesive bed with the punched leg and align it. Then embed the leg completely in the adhesive. - Attach the tile:
Align the tile flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile. - Fill the joint:
Finally, fill the joint completely with grout.
If the natural Brass straight edge tile trim needs to be shortened, a hacksaw or an angle grinder (use a new cut-off wheel) can be used.
Care advice
Care advice
Care instructions for the Brass straight edge tile trim:
No special care is required for the Brass straight edge tile trim.
If necessary, simply wipe with mild cleaning agents and a cloth. Just make sure that no aggressive or abrasive cleaning agents are used, as this could damage the surface.
For more thorough cleaning, we recommend wiping the natural brass-straight-edge-tile-trim with a soft, damp cloth and then polishing it dry.
The profile retains its attractive shine through regular cleaning and careful treatment.
Angle profiles at a glance
Angle profiles at a glance
