DEVI heating cable

Area of application DEVI heating cable

The DEVIcomfort 10T heating cable is laid in the dimpled structure of the DURABASE CI-H mat and forms the core of the electric surface heating system. The Easy-Click system allows the cable to be fixed in place without additional fastening materials, enabling quick and secure installation.

Depending on the laying distance, the heating output is adjusted to suit requirements – from gentle additional heating to full room heating. Thanks to its robust construction, 360° shielding and 20-year warranty, the cable is particularly durable and maintenance-free.

Typical application: Surface heating under tile and natural stone coverings in bathrooms, kitchens, living rooms and bedrooms, as well as in renovation projects with low installation heights.

Installation of DEVIcomfort heating cables

1. Preparation
   Check the substrate and lay the DURABASE CI-H mat correctly. Plan the cable route in advance to ensure even heat distribution.
2. Laying the heating cable
   Click the heating cable (red) directly into the dimpled structure of the mat using the Easy-Click system. Lay the cable without crossings and observe the minimum bending radius (approx. 5 cm).
3. Power adjustment through laying distance
   The closer the cables are laid, the higher the heating power. Example: With a distance of 4 studs, approx. 83 W/m², with a distance of 2 studs, up to 167 W/m². An overview table makes it easier to make the right choice.
4. Connecting the PTC thermistor
   Run the PTC thermistor (black, 4 m) to the wall and lay it flush with the thermostat. Make sure that the sleeve connection is not in the screed or adhesive.
5. Sealing & covering
   Seal the entire surface of the mat with flexible adhesive to fix the cable and sensor in place. Lay tiles or natural stone slabs using the buttering-floating method.