Product description
Product description
Aluminium door threshold strip - tile to tile threshold strip:
For the elegant transition between two floor coverings - our transition profile aluminum CLIP.
The system consists of three parts. The base profile, yellow and red fastening clips and the top profile. With the aluminum transition profile CLIP you get a profile in which no screws can be seen after installation.
If the attachment is only done with the yellow clips, the profile can be used for coverings of 7 - 13 mm. For slightly thicker surfaces, the red clips included in the scope of delivery can also be attached. The profile can now also be used for covering heights of up to 20 mm.
The profile is available in either silver or titanium.
Note that the profile cannot compensate for height differences between the surfaces. You can find a suitable article for this in our height adjustment profile CLIP aluminum.
Our recommendation
Our recommendation
Aluminium threshold strip CLIP features:
For covering heights |
7 - 20 mm |
visibility | 40 mm |
material | aluminum |
Strength | approx. 1.2 mm |
surfaces | • silver matt anodized • titanium matt anodized |
scope of delivery |
• Basic profile • Top profile • Plastic clips (yellow & red) |
Applications
Applications
Areas of application of the tile threshold strip clip:
With the transition profiles aluminum CLIP two floor coverings of the same height are connected to each other. These are often used as room dividers between doors
They are used in all private spaces. They can also be used in commercial areas, for example in offices.
Processing
Processing
Installation of the tile to tile threshold strip CLIP:
Can be shortened with appropriate tools.
- Screwing the base profile:
First, screw the base profile into the intended place in the floor. - Laying flooring:
Next, the floor covering must be laid properly. This is attached on both sides, partly over the base profile. - Attach clips:
Now slide the fastening clips onto the bar of the top profile. - Fix top profile:
Finally, the top profile must be placed in the base profile's socket and fixed in place by gently tapping it in so that the top profile rests evenly on the floor coverings everywhere.
Care advice
Care advice
How to care for your door threshold strip CLIP:
To clean the profile, use mild cleaning agents and a soft cloth.
This can be used to remove dust and dirt. Sharp cleaning tools and aggressive cleaning agents should be avoided. These could damage the surface.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance