Product description
Product description
Façade channel DW Drain galvanized steel:
Our drainage channel offers a number of features that make it indispensable for drainage on balconies or terraces. This façade channel is perforated on both sides, making it ideal for façade drainage or as a soakaway. The grating can be easily removed to clean the channel.
The material quality of the drainage channel is very high. This means you benefit from an extremely robust and corrosion-resistant channel. The channels can be shortened to the right length using the appropriate tools, allowing you to use them flexibly.
You can also choose between a width of 100 mm and 140 mm. Of course, you can also find suitable accessories here. See the exceptional quality for yourself.
If you are looking for other drainage channels, you will find them in the category of the same name.
Our recommendation
Our recommendation
Galvanized steel drainage channel for driveway DW Drain properties:
| Material |
Steel |
| Surface |
Galvanized |
| Hole dimensions |
30 x 5 mm |
| Length |
1 m |
| Width |
100 mm / 140 mm |
| Height |
39 mm |
| Material thickness |
1,5 mm |
Applications
Applications
Areas of application for the DW-Drain galvanized steel façade channel:
Our drainage channel is perfect for drainage on balconies or terraces.
Water is reliably drained away so that the structure is safe from moisture damage. Our channel is primarily laid in gravel or on sealed substrates.
Processing
Processing
How to install your patio gutter:
The DW Drain galvanized steel façade gutter is installed in several steps:
- Shorten the gutter to the required length:
First, shorten the gutter to the required length. Only use tools that are completely clean. Also make sure that there are no flying sparks. - Prepare the substrate:
The substrate must now be properly prepared. If the gutter is laid on a sealed surface, an EPDM protective film should be placed between the gutter and the seal. If the channel is laid on gravel, ensure that it is properly compacted so that the channel does not sink. - Placing the gutter:
The gutter can now be laid loosely or glued onto the prepared floor. - Attaching the end caps:
These are simply pushed onto the ends of the channel. - Remove joint material residue or excess adhesive:
If adhesive or joint material residue has accumulated during installation, remove it with a soft sponge and clean water. Never use cement residue remover.
Care advice
Care advice
How do you maintain your façade gutter?
Regular and proper cleaning is the only way to ensure that the gutter functions properly. Only acidic or alkaline cleaners should not be used; coarse dirt can easily be removed with a broom or high-pressure cleaner.
This will prevent deposits from forming in the gutter so that the water can drain properly, and any soiling from other metals must be removed immediately to prevent corrosion.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance
