Straight edge tile trims

The materials of our angle profiles:

You can choose between aluminum, stainless steel, PVC and brass. Depending on the application, the materials have different advantages:

Aluminum angle profiles:

L-profilesmade of aluminum are available with different surfaces. Anodized profiles receive a thin protective layer through a chemical process. Powder-coated profiles impress with their uniform appearance. Of course, there are also naturalangle profilesmade of aluminum with us.The different methods of surface treatment allow for a variety of different colors and designs. These are primarily used indoors. Contact with copper should be avoided.

Stainless steel angle profiles:

When it comes to stainless steel profiles, a distinction is made between V2A and V4A stainless steel. The difference lies in the composition of the stainless steel. Stainless steel profiles are used both indoors and outdoors.

V2A profiles can be used for all conventional areas. They are durable and resistant to moisture and corrosion. In addition to natural profiles made of V2A stainless steel, you can also find brushed or polishedangle railswith us.
angle end profilesmade of V4A, on the other hand, are used when the profiles can come into contact with chlorine or hydrochloric acid.

PVC angle profiles:

The cheapest alternative isangle profilesmade of plastic. In addition to the price, another advantage of PVC profiles is that they are available in many different colors. Of course, however, they are less robust than profiles made of stainless steel, aluminum and brass. As a result, they are mainly used in areas that are not subject to heavy loads.

Brass angle profiles:

Brass profiles guarantee a visually unique tile finish. The patina that develops over time provides individual charm.L-profilesmade of brass, very durable and robust.angle profilesmade of brass can be used in a variety of ways indoors. Care must be taken to ensure that they do not come into contact with acidic cleaning agents.

Available heights of the L-rails:

In our range you will find heights from 2 - 30 mm. The small heights are ideal for vinyl floors. For patio tiles you will find what you are looking for in the large heights.

When it comes to the height, it is important that it is selected 1 - 2 mm higher than the thickness of the tile or panel.This ensures that the tiles are flush. This buffer is necessary because the tile adhesive adds a little extra thickness. If it is too low, the tile will protrude and not be adequately protected. If the height is too high, it can create a tripping hazard.

Angle end profiles in use:

angle profilesimpress with their simple design and are available in different colors, materials and surfaces. Just as versatile as our selection ofangle profilesare their possible uses. Here are some practical examples:

L-profiles for pre-wall elements:

The finish on tiled wall elements is one of the most common areas of application. All materials can be used for this. However, aluminum or stainless steel should be used near wet areas. In order to lay these profiles around the corners, they must be mitred.

Angle end profiles for stair steps:

For tiled stairs,angle profilesthe most efficient protection for your step edges. Above allangle profilesMade of aluminum or stainless steel are recommended for this purpose. Due to the material, these are more robust than PVC and therefore provide better protection for the tile steps. The robustness of the profiles is crucial due to the higher load on stairs.

Angle profiles on balconies or terraces:

angle end profilesare available in heights of up to 30 mm. This means they can be used for particularly thick panels. Our stainless steel profiles are recommended for outdoor use. The material is corrosion-resistant and therefore better protected against the effects of the weather.

Angle rails in the shower:

For tiled niches, ourL-profilesmade of stainless steel. If processed correctly, these are not susceptible to rust due to the material and are therefore ideal for use in wet areas.angle profilesmade of stainless steel with a brushed surface also fit perfectly with ourshower profilesFor the corner areas, the profiles must also be mitred.

Angle profiles between floor coverings:

As a subtle demarcation between tiles and other floor coverings,angle end profilesthe best solution. The narrow visible edge ensures a harmonious and discreet separation of two floor coverings.