Product description
Product description
Adjustable paving support pedestals with rail system:
These pedestal supports are suitable for tiles and natural stone coverings as well as our pedestal support rail system and have a load capacity of 400kg.
We differentiate between 4 variants:
- S Tile: Installation height 10 - 15 mm. Raising pieces 5 mm additionally available for total height up to 25 mm. Tiles can be placed directly on top. Joint width 4 mm. Diameter 150 / 190 mm.
- S rail: installation height 10 - 15 mm. Raising pieces 5 mm additionally available for total height up to 25 mm. Used together with rail system and rail attachments. Joint width 2 - 4 mm depending on rail attachment. Diameter 150 / 190 mm.
- M: Installation height 25 - 50 mm. Raising pieces 25 mm additionally available for total height up to 125 mm. Can be used for tile rail system. Joint width 4 mm, 2 mm also possible with rail system. Self-levelling head for slopes up to 5 %. Can be fixed with the enclosed levelling block.
- L: Installation height 125 - 225 mm. Additional 100 mm extension pieces available for total height up to 1025 mm. Can be used for tile rail system. Joint width 4 mm, 2 mm also possible with rail system. Self-levelling head for slopes up to 5 %. Can be fixed with the enclosed levelling block. Rotation blocking is also possible.
Further accessories for the system and other paving pedestals can be found in the category of the same name.
technical data
technical data
DURAL adjustable pedestals with rail system:
| Material |
Plastic |
| Top contact surface |
• S 150 mm
• M 140 mm
• L 120 mm |
| Bottom contact surface |
• S 190 mm
• M 210 mm
• L 200 mm |
| Load capacity |
• S 400 kg
• M 1000 kg
• L 1000 kg |
Applications
Applications
Processing
Processing
Installation of the DURAL pedestal rail system for paving:
- Preparation of the substrate:
Ensure that the substrate is stable. The pedestals can be laid on concrete, gravel/chippings and wood. On grit/gravel, 40 x 40 cm base plates must be installed. In addition, the substrate must be properly sealed and a DR100++ drainage membrane is recommended for drainage. - Positioning the pedestals:
Start positioning the pedestals in a corner and adjust the height accordingly. Use a spirit level to check the slope. Unevenness is levelled out by the self-levelling head. - Attaching the rail system:
The pedestal support heads (except for pedestal support head S) are rotated by 45° and the rails are clipped in. When connecting individual rails, it is recommended to fix the connecting pieces with assembly adhesive. Always use the spirit level to check that the height of the pedestals is set correctly. - Fitting the rail attachments to the rails:
The attachments are now simply clipped onto the rails. If necessary, additional rails can be laid crosswise underneath the existing rail construction at a distance of approx. 300 cm to ensure additional stability. - Laying the slabs:
The slabs can now be laid. - Pedestals at the edge area:
For edge areas, the base element may need to be cut to size at the markings. For edge areas, cut the base element to fit at the markings and break out the bars on the head so that laying the slab up to the edge is not impaired.
To prevent the slabs from hitting the wall, we also offer the matching wall connection clips in the shop.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance
Product description
