The brass T-shaped separating profile is the ideal solution for clean and seamless transitions between flat floor coverings.
The decorative separating profile is most at home in natural stone surfaces, as the tread is made of solid brass – this means that natural stone surfaces can be sanded and polished multiple times.
With a width of 5 mm, the profile is very narrow and can be inserted into the joints. The web height of 10 mm or 25 mm can be freely selected in the article and enables an elegant connection between different floor coverings. The separating profiles are 2.5 m long and made of untreated natural brass.
| Material | Brass |
| Width a | 5 mm | Surface | Untreated, with drawing marks where applicable |
| Height b | • 10 mm • 25 mm |
| Length | 250 cm |
Protect visible surfaces from contact with tile adhesive or grout and, if necessary, clean immediately with a cloth and clean water. Then rub dry. The generally accepted rules of technology must be observed. Suitability in terms of mechanical and chemical resistance must always be checked in each individual case.
DURAL GmbH
Südring 11
56412 Ruppach-Goldhausen – Germany
E-Mail: info@dural.de
