Tile profiles are mostly used to protect edges so that possible damage to the tiles can be prevented. But tile profiles can be used in different ways. Depending on the type, they can be installed permanently in the tile surface or can be placed later on the tiles or floor covering. In the following article, we would like to give you a brief insight into our range of tile profiles.
|
Our range of special profiles includes the following categories
|
Would you like a little more detail? No problem. We'll go into every point in more detail!
Moving from one floor to another can create a seamless transition between two floor coverings of different heights with an adjustment or height compensation profile. In our range you will find solutions for various applications, including wide aluminum profiles with generous treads, which are particularly suitable for larger height differences, as well as narrower variants. These adjustment profiles are often used outdoors, especially in garage entrances, as they can withstand large loads. They enable a clean, stepless transition between different floor coverings, be it from tiles to parquet or from tiles to carpet, and ensure a harmonious visual flow.
Our aluminum height adjustment profiles are available in various finishes and lengths to meet your individual requirements.
Floor finishing profiles are used to neatly finish the floor covering and at the same time protect the edges. There are different types of finishing profiles for different components and materials, such as tiles, wall and ceiling coverings, stairs, windows and doors. Each profile is specifically designed for its purpose and ensures a clean, safe and permanent connection between components and materials. These profiles fulfil two main functions: Firstly, they serve as a decorative element, give the floor covering a professional look and neatly finish edges. Secondly, they offer protection against damage and wear by providing an additional layer against impacts, scratches and moisture.
The range of floor finishing profiles includes different materials, shapes, heights and lengths to meet the individual requirements of different building projects. Stainless steel and aluminium are common material options. The profiles are available for coverings such as parquet, laminate, vinyl, carpet and tiles. In addition, there are a variety of tile trims, including angle profiles and square rails, which are specifically suitable for tile finishes. The selection ranges from screwable to self-adhesive profiles.
Connection profiles, also known as cove profiles, create attractive transitions between wall and floor or between two walls. The name "cove profile" is derived from its characteristic feature - a concave rounding on the edge. This cove is used to create a clean connection between wall and floor, creating durable and aesthetically pleasing corner areas. The connection profile offers an elegant solution to easily cover torn, poorly bonded or discolored silicone joints. With its stylish appearance, the connection profile opens up new design possibilities, especially when renovating or refurbishing private and commercial spaces.
In our online shop you will not only find connection profiles, but also suitable accessories such as internal corners, external corners and 3D corners. For versatile installation both vertically and horizontally, we recommend our 3D internal corners with three connections for connection profiles. To ensure a visually appealing side finish, we recommend covering the sides with the corresponding end caps.
The worktop profile plays a crucial role in the kitchen that is used every day, especially on the work surfaces where cutting, washing and cooking are carried out. To avoid unpleasant consequences for people and materials, we offer our worktop profile. With its rounded design, it minimizes the risk of injury for you and your children by effectively covering sharp edges. In addition, it protects the sensitive tile covering from possible damage that can occur in the kitchen due to various stresses.
The aluminum construction of the profile ensures a sufficiently high level of strength and thus offers optimal protection for the vulnerable tiles and worktops against external influences. In addition to the protective aspect, the worktop profile also serves aesthetic purposes. It allows for various design options, be it through visual differentiation from other elements in the room or through color coordination for a harmonious overall design.
The worktop profile, also known as the end profile, not only offers protection but also secure anchoring in the mortar bed of the tile for a firm hold. The profile is available in silver and titanium anodized, and we also offer matching accessories such as external and internal corners and end caps.
Today's tile decoration increasingly includes tile rails, and in our online shop we offer a variety of decorative profiles in different materials, surfaces and widths. Decorative profiles are the perfect way to give rooms an individual touch and create a timeless elegance. In our extensive online shop we present a wide range of decorative profiles that are available in different materials, surfaces and widths. In the bathroom in particular, stainless steel decorative profiles prove to be a highlight that is not only aesthetically pleasing, but also impresses with its robustness.
For those looking for a more affordable alternative, our aluminum decorative profiles offer an excellent solution. With visible widths of 10 mm, 15 mm and 20 mm, they are narrower than the stainless steel profiles at 25 mm. The aluminum profiles are available in various colors and surfaces and enable flexible integration into different room concepts.
Expansion joint profiles are perfect for screed joints or areas where floor tensions need to be compensated. These profiles have an EPDM insert that absorbs floor movements and thus helps prevent cracks in the tiles. Since every substrate expands or contracts depending on the temperature, the use of expansion joint profiles is particularly important, especially when there are different substrates on which the new floor is being laid. When installing, care must be taken to ensure that the profiles neither protrude from the floor nor sink into it. A flush finish is ideal. To achieve this, the tile rails should always be chosen 1 mm higher than the tiles.
Our range includes expansion joint profiles made of aluminium, stainless steel and PVC in various heights.
Corner protection angles live up to their name: They not only protect corners and edges, but also cover up existing damage while protecting against new damage. They are particularly useful in areas with heavy loads on the corners, such as busy corridors or entrance areas of hotels or hospitals.
In our online shop we offer both single-edged and triple-edged corner protectors. Although they appear similar at first glance, a closer look allows you to see the additional edges. These ensure a clean finish on the wall and a smoother transition.
Our corner protectors are available in stainless steel or aluminum, and you have the option to choose between different finishes, colors and heights.
Stair profiles are special molded parts that are attached to the edges of stair treads. They are made of various materials such as aluminum, stainless steel, brass or PVC and serve both to protect against damage and to increase safety on the stairs by providing a non-slip surface. In addition, they improve the appearance of the stairs and contribute to a modern, appealing look. The different designs of the stair profiles allow adaptation to different building situations, both indoors and outdoors. Our diverse selection of stair profiles includes not only conventional variants made of aluminum and stainless steel, but also innovative options such as LED stair rails, profiles with anti-slip safety inserts and anti-slip adhesive tape. With suitable accessories such as inserts and end caps, our stair profiles can be seamlessly integrated into any staircase design. Whether you prefer a modern or classic design, our stair profiles offer an extensive range of options to meet your individual requirements. The easy installation and the ability to cut the profiles to the desired size guarantee a perfect fit for every staircase.
Transition profiles, also known as transfer profiles, offer an ideal solution for seamless transitions between doors and different floor coverings such as tiles, carpet, laminate or vinyl. These tile rails enable an aesthetically pleasing connection of different floor coverings, protect the edges from wear and tear and provide a safe walking surface. The versatile benefits of transition profiles range from aesthetic design to preventing tripping hazards by creating a flat, smooth surface. They are indispensable for creating harmonious transitions between different floor coverings and can be made from materials such as aluminum, stainless steel, brass or plastic in various designs and colors.
We have different transition profiles in our range. We roughly divide them into T-shaped transition profiles, flat transition profiles and multi-transition profiles. Whether self-adhesive or with screw fastening, we have a wide range of products for every construction situation.
Flexible tile profiles are special elements used for installing tiles on walls, corners and edges that are not straight. They are particularly used on rounded edges of tiles and protect their edge contours. Flexible tile rails are particularly useful when laying tiles on curved or bent surfaces, such as round showers, arches, columns or round walls. Unlike rigid profiles, they allow for precise and clean laying of the tiles, resulting in a visually appealing and professional finish.
The flexible tile rails are available in various designs that are tailored to the individual requirements of the installation. They are available in different sizes, shapes and materials such as aluminum, stainless steel and plastic and therefore offer a wide range of design options for every type of installation.
