Stainless steel square edge tile trim

Processing of the stainless steel square edge tile trim:

1. Select height: Since tile adhesive is applied, the profile must be selected 1 - 2 mm higher than the thickness of the tile. This ensures a clean and flush tile finish.
2. Apply tile adhesive: Before applying the adhesive, the surface must be cleaned of dust and dirt. Then apply tile adhesive to the appropriate area using a notched trowel.
3. Attaching the stainless steel square profile: Now press the punched leg of the profile into the adhesive bed and align the profile. The leg is then completely embedded in the adhesive.
4. Installing the tiles: The tile must be aligned flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile.
5. Filling the joint: Finally, fill the joint completely with joint mortar.

If that square profile stainless steel must be shortened,A hacksaw or a grinder (use a fresh cutting disc) can be used.

It is not intended to push the tile into the profile.

Areas of application for the stainless steel square box edge tile trim

Square profiles made of stainless steel are widely used in various areas where clean and precise edge guidance of floor coverings is required. They not only provide a visually appealing finish, but also protect the edges from damage.

A main area of ​​application is pre-wall elements, especially in bathrooms, where the profiles ensure a clean tile finish.

Stair nosings are another common area of ​​application.

Care instructions for the stainless steel tile trim square edge:

Our square profile made of high-quality V2A stainless steel is characterized by its robustness and durability.

It does not require any special care. However, we recommend using pH-neutral cleaning agents to protect the material and preserve the shine of the stainless steel.

Informations complémentaires sur la sécurité du produit

Fabricant

Tirocco.com GmbH
Maximiliansplatz 15
80333 München - Allemagne
E-mail : service@tirocco.com