Plastic drainage channel UD Pro

Installation instructions for the UD Pro plastic drainage channel:

In general, the UD Pro can be shortened as required. With the vertical drain, up to 6 m of channel may be installed per drain and with the horizontal drain, a maximum of 5 m of channel may be installed in one piece.

1. Excavating the foundation: A foundation at least 8 cm high and 14 cm wide is required for the UDP 100 and 13 cm high and 14 cm wide for the UDP 65.
2. Check completeness: Now check that all parts for the desired installation are present and lay them out on a straight and clean surface.
3. Determine the location of the drain: For a vertical drain, mark this on the back of the channel in the correct position using the drain support. Then saw out the marked hole with a hole saw. For horizontal drains, simply fix the drain support horizontally as an end piece.
4. Gluing system components: All parts can now be glued together with PVC-U adhesive. How the individual accessories are attached is noted again in the relevant article.
5. Preparing the foundation: Now prepare the foundation using concrete or a gravel bed.
6. Laying the channel system: Now lay the system in the foundation. Pull a concrete wedge along the channel, and once the foundation has hardened, any covering can be applied to the channel.

Areas of application for the UD Pro plastic drainage channel:

The drainage channel is extremely versatile for outdoor use. It can be used as a pool surround, for example, or placed around patio boundaries, and the UD Pro drainage channel is extremely stable and can withstand loads of up to 6-7 tons.

Care instructions for the UD Pro drainage channel plastic:

The drainage channel does not require any special care. It is sufficient to wipe the grating regularly with mild, non-abrasive cleaners to keep it clean.

Informations complémentaires sur la sécurité du produit

Fabricant

Tirocco.com GmbH
Maximiliansplatz 15
80333 München - Allemagne
E-mail : service@tirocco.com