DURAL brushed aluminium square edge tile trim silver

This is how the silver brushed metal square edge tile edging trim:

1. The right choice of height for your profile: Select the profile 1 - 2 mm higher than the thickness of the tile in advance. In order to align the tile and profile flush with each other, this buffer must be taken into account, as the tile adhesive will be slightly raised.
2. Apply tile adhesive: Now use a notched trowel to apply the tile adhesive to the substrate, which has been cleaned of dirt and dust.
3. Attaching the DURAL square edge tile trim in silver brushed aluminium: The profile with the punched leg is then pressed into the adhesive bed and aligned. Now embed the leg completely.
4. Attach the tile: Press the tile firmly into the adhesive and align it flush with the top edge of the profile with a gap of 2 - 3 mm to the profile.
5. Close the joint: Finally, the joint is completely filled with grout.

If necessary, shorten the profiles using either a hacksaw or an angle grinder.

Areas of application for the silver brushed box edge tile trim:

The DURAL silver brushed aluminium square profiles can be used in various modern rooms. Thanks to the increased corrosion protection, they can also be used in bathrooms.

Whether in the living area, kitchen or bathroom - use these profiles for a clean tile finish.

Care instructions for the DURAL brushed aluminium square box tile trim:

The DURAL brushed aluminium square edge tile trim silver generally requires no special care.

Commercially available cleaning agents with a neutral pH value can be used for cleaning in order to preserve the unique appearance of the profile.

Additional Product Safety Information

Manufacturer

DURAL GmbH
Südring 11
56412 Ruppach-Goldhausen – Germany
E-Mail: info@dural.de