Product description
Product description
Stainless steel straight edge tile trim:
Our stainless steel angle profile offers a versatile solution for the perfect finish to tiling work.
Brushed profiles are suitable for a modern and elegant appearance. These give your tiles a matt finish and go perfectly with contemporary designs. If you prefer it shiny, the polished angle profiles made of stainless steel are the right choice. These bring a touch of elegance to any room. For a natural look, the angle profiles in natural stainless steel are the ideal choice. With a slightly shiny surface, they give your tiles a stylish touch. We ship brushed and polished profiles with a protective film.
Select the profiles 1 - 2 mm higher than the tile thickness.
For further angle profiles (other materials and surfaces), simply look in the relevant category. You can find 10 mm samples of the different profiles in the accessories.
Our recommendation
Our recommendation
Stainless steel straight edge tile trim properties:
| Material |
V2A stainless steel |
| Material strength |
0,8 mm ± 0,1 mm |
| Surfaces |
• nature (slightly shiny)
• brushed (matt)
• polished (very glossy) |
| Leg width |
ca. 22 mm |
Applications
Applications
Areas of application for the stainless steel straight edge tile trim:
Stainless steel straight edge tile trim are versatile and can be used in various areas where a clean edge finish is required for the floor covering.
Diese Profile bieten Schutz und verleihen dem Raum gleichzeitig einen optisch ansprechenden Look.
Processing
Processing
Processing of the stainless steel angle profile:
- Select the height of the profile:
Due to the slightly thicker tile adhesive, the profile should be 1 - 2 mm higher than the thickness of the tile. This buffer is essential to achieve a clean, flush finish on your tile edge. - Applying the tile adhesive:
Remove dust and dirt from the substrate and then apply tile adhesive to the corresponding area using a notched trowel. - Attach the profile:
Now press the punched leg of the profile into the adhesive bed and align the profile. The leg is then completely embedded in the adhesive. - Attach the tile:
The tile must be aligned flush with the top edge of the profile and with a joint of 2 - 3 mm to the profile. - Filling the joint:
Finally, fill the joint completely with grout.
A hacksaw or an angle grinder (use a new cutting disc) can generally be used for shortening.
Care advice
Care advice
Care instructions for the stainless steel straight edge tile trim:
Tile trilm profiles made of high-quality V2A stainless steel are extremely easy to clean.
They do not require any special care and can simply be cleaned with pH-neutral cleaners. Avoid using aggressive or abrasive cleaning agents as these could damage the surface.
Die Schienen regelmäßig mit einem weichen Tuch oder Schwamm abwaschen, um Schmutz und Fingerabdrücke zu entfernen.
For stubborn stains, we recommend leaving the cleaner to work for a few minutes and then rinsing thoroughly.
Angle profiles at a glance
Angle profiles at a glance
