Product description
Product description
Aluminium edge floor trim CLIP:
If you want to elegantly finish your floor covering, you have come to the right place with the aluminium CLIP finishing profile.
By attaching the top profile using the clips, no screws are visible after installing the system. The system consists of base profile, fastening clips (red and yellow) and top profile.
With the yellow clips, the profile is suitable for coverings of 6 - 8 mm. If the surface is a little thicker, you can also attach the red clips included in the scope of delivery. These can also be used to complete coverings with a height of up to 14 mm.
We offer the profile in silver or titanium. You can find alternatives to this article in the category Final profiles.
Our recommendation
Our recommendation
Aluminium edge trim flooring CLIP properties:
| For covering heights |
6 - 14 mm |
| visibility | 36 mm |
| material | aluminum |
| surfaces |
• silver matt anodized
• titanium matt anodized |
| scope of delivery |
• Basic profile
• Top profile
• Plastic clips (yellow & red) |
Applications
Applications
Areas of application for the edge trim flooring CLIP:
The end profile aluminum clip is used for the clean finish of any floor covering.
These profiles can be installed in a wide variety of rooms, whether in private areas or in offices or other public interior spaces.
Processing
Processing
How to install the CLIP edge floor trim:
The profile can be shortened with appropriate tools.
- Screwing the base profile:
First, the base profile must be screwed into the appropriate place in the edge area of the floor covering. - Attach clips:
The fastening clips are then pushed onto the bar of the top profile. - Fix top profile:
Now place the top profile into the base profile's socket and fix it in the socket by tapping it in slightly so that the top profile rests evenly on the floor covering everywhere and seals it off.
Care advice
Care advice
Care instructions for the CLIP edge floor trim:
Not much is needed to clean the profile.
Make sure to use mild cleaning agents and a soft cloth. This can easily remove dust and dirt.
Sharp cleaning tools and aggressive cleaning agents should be avoided as these could damage the surface.
Produktsicherheit
Produktsicherheit
Angle profiles at a glance
Angle profiles at a glance
