Stainless steel non slip stair nosing trim

Processing of the stainless steel non slip stair nosing profile:

1. Choosing the right height: It is important to ensure that the height of the profile is 1 - 2 mm higher than the thickness of the tile. This is because the tile adhesive will spread slightly.
2. Applying the tile adhesive: Before applying the adhesive, make sure that the surface is free of dust and dirt. Then apply the adhesive using a notched trowel.
3. Attaching the profile: Now the punched leg of thestainless steel anti-slip step profilepressed into the adhesive bed. At the same time, align the profile. The leg is then completely embedded in the adhesive.
4. Installing the tile: The tile must be aligned flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile.
5. Fill the gap: Finally, fill the joint completely with joint mortar.

To shorten the stainless steel anti-slip step profile. A hacksaw or a grinder (use a new cutting disc) can be used.

Areas of application of the stainless steel anti-slip nosing stairs:

With the step profile stainless steel anti-slip. You get a good solution for heavily used stairs, both indoors and outdoors.

Its versatility allows it to be used in a wide range of contexts - private, public and commercial. In addition, it has proven particularly useful in environments where high slip resistance is essential. Thanks to its R10/V4 slip resistance test, the profile ensures safety and stability, even on busy stairs.

This is how to maintain the stainless steel non slip stair nosing profile:

The profile is easy to maintain and does not require any special care.

Common, non-abrasive cleaners can be used for cleaning. However, make sure that they do not contain solvents, hydrochloric acid or hydrofluoric acid.

Additional Product Safety Information

Manufacturer

DURAL GmbH
Südring 11
56412 Ruppach-Goldhausen – Germany
E-Mail: info@dural.de