Natural aluminium straight edge tile trim

How to install the natural aluminium straight edge tile trim:

1. Height selection of the profile: Due to the slightly thicker tile adhesive, the profile should be selected 1 - 2 mm higher than the thickness of the tile. This ensures a flush and clean result.
2. Apply tile adhesive: Remove dust and dirt from the substrate and then apply tile adhesive to the corresponding area using a notched trowel.
3. Attach Natural aluminium straight edge tile trim: The punched leg of the profile must now be pressed into the adhesive bed and the profile aligned. The leg is then completely embedded in the adhesive.
4. Attach the tile: Now align the tile flush with the top edge of the profile and with a gap of 2 - 3 mm to the profile.
5. Fill the joint: Finally, fill the joint between the profile and the tile completely with grout.

A hacksaw, for example, can be used to shorten the natural aluminium straight edge tile trim.

Areas of application for the aluminum l shaped tile edging trim:

The natural aluminium straight edge tile trim offer versatile application possibilities in various rooms.

They are ideal for interiors where a clean tile finish is required. They are used in various areas where tiled floors or walls are present.

Care instructions for the aluminum l-shaped tile edging trim:

Our profile is characterised by its easy-care handling.

If necessary, it can simply be cleaned with mild cleaning agents and a soft cloth. Abrasive cleaners should be avoided in order not to damage the surface.

With the right care, the natural aluminium straight edge tile trim will retain its shine and robustness for years to come.

Additional Product Safety Information

Manufacturer

Tirocco.com GmbH
Maximiliansplatz 15
80333 München - Germany
E-Mail: service@tirocco.com